Bambu Labs X1 Carbon

Be sure to estimate times for prints so you can reserve the machine for the right amount of time.

Review the Shop guide on 3d Printing

Be sure to review these videos before your in person checkout.  

This is a direct link to the You Tube play list. https://www.youtube.com/playlist?list=PLv65CP2QM2rGiBuViRXCO928NxHxQHxnc

Never let go of the filament when handling a spool. If you do it could tangle and cause issues for you or other users when you least expect it. If you can't hold the filament end, secure it with Tape or in a set of holes in the spool. 

Glue is not needed for printing PLA on the textured PEI Plate. Please do not use glue. If for some reason you feel compelled to use glue. You MUST Clean the build plate after you complete your print. 

The X1C Manual can be found online here: Manual

General info on build volume / size: 
Physical Plate Dimensions: 257 × 257 mm (nominal size for the spring steel sheets)
Max Usable Print Area: 256 × 256 mm
Max Print Height (Z-axis): 256 mm

https://www.thingiverse.com/

https://www.printables.com/

https://makerworld.com/en

For making your own designs you can use any CAD program to do this.
Links to some well known programs that you can use for free:

https://www.tinkercad.com/

https://www.freecad.org/