Calibration adjustments to the bed are not to be performed by members. If calibration is needed, make a request in the #woodshop SLACK channel.
A quick beginner's Video (~4 min) on Jointer basics
Manual
Features:
- Helical cutterhead with 4-sided carbide inserts provides smoother, quieter cutting and a superior finish
- Extra-long tables are mounted on dovetailed ways for extended workpiece support
- Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
- Switch is mounted high for operator convenience
- Handwheel operated worm gear system for smooth fence tilting
- Magnetic push blocks can be stored on the machine within constant reach
- Non-mar fence insert protects table surface
Specifications:
- Motor: 2HP, 1PH, 230V, 9A
- Number of Knives: 54
- Helical Knife Size (L x W x T) (In.): 15 x 15 x 2.5
- Cutterhead Speed (RPM): 7,000
- Cutting Capacity (W x D) (In.): 8 x 1/2
- Table Size (L x W) (In.): 73 x 8-1/2
- Table Height from Floor (In.): 32
- Infeed Table Length (In.): 35-1/4
- Outfeed Table Length (In.): 35-1/2
- Fence Size (L x H) (In.): 38 x 4-3/4
- Fence Tilt (Deg.): 45 Forward, 45 Backward
- Fence Positive Stops (Deg.): 45, 90, -45
- Dust Collection Minimum CFM Required (CFM): 450
- Dust Port Outside Diameter (In.): 4
- Recommended Circuit Size (Amps.): 20V